I've reduced my error message down to just ONE driver that is causing the BSOD's, which is the
I've attached the required documents and I am listing my system specs below, I hope that you have enough information to make some sense of this issue.
These will generally be considered in the development of HTML 5.2.
The implementation report produced for HTML 5.1 demonstrates that in almost every case changes are matched by interoperable implementation.
Do note that with hard disks, the connections can be faulty as well (i.e the SATA cables from the controller on the board to the hard disk itself).
Very rarely do software complications such as a driver causing memory corruption cause this bugcheck, however it does happen.
This document was published by the Web Platform Working Group as a Recommendation.The required data was not placed into memory because of an I/O error. An I/O error is when any hardware device (hard disk, flash drive, etc) cannot perform its basic input/output actions such as reading or copying data.When this is the case with a hard disk itself, or any storage related media, it's due to the device PHYSICALLY failing.- ESET Knowledgebase MSE - Microsoft Security Essentials - Microsoft Windows 4.Sentinel64- Mon Jun 02 Type cmd (right click run as admin to execute Elevated CMD) Elevated CMD should now be opened, type the following: chkdsk x: /r x implies your drive letter, so if your hard drive in question is letter c, it would be: chkdsk c: /r Restart system and let chkdsk run.In Windows, if you are having what you believe to be device driver related issues that may cause conflicts or false positive, it may be a wise decision to choose the most minimal testing environment (DOS).